Geosynthetic Accreditation Institute
Geomatrix S.A.S.
Attn: Javier Diaz Cipagauta
(571) 424-9999
List
of Accredited Test Methods
Geosynthetic Accreditation Institute
Geomatrix S.A.S.
Attn: Javier Diaz Cipagauta
(571) 424-9999
List
of Accredited Test Methods
| 1a | ASTM D751a | - Dimensions & Mass |
| 1b | ASTM D751b | - Breaking Strength |
| 1f | ASTM D751f | - Tearing Strength |
| 1o | ASTM D751o | - Seam Strength |
| 2 | ASTM D1004 | - 90°C Tear |
| 3 | ASTM D2122 | - Pipe dimensions |
| 4 | ASTM D2256 | - Tensile Yarns S Stand |
| 5 | ASTM D2412 | - Pipe Parallel Plate |
| 6 | ASTM D3776 | - Mass/Unit Area |
| 7 | ASTM D4355 | - Xenon Arc |
| 8 | ASTM D4491 | - Permittivity |
| 9 | ASTM D4533 | - Trap Tear |
| 10 | ASTM D4595 | - GT Wide Width Tensile |
| 11 | ASTM D4632 | - GT Grab |
| 12 | ASTM D4751 | - A.O.S. |
| 13 | ASTM D4833 | - Index Puncture |
| 14 | ASTM D4884 | - GT Sewn Seam |
| 15 | ASTM D5035 | - Textile Strip |
| 16 | ASTM D5101 | - Gradient Ratio |
| 17 | ASTM D5199 | - Thickness |
| 18 | ASTM D5261 | - GT Mass/Unit Area |
| 19 | ASTM D5323 | - 2% Secant Modulus |
| 20 | ASTM D6140 | - Asphalt Retention |
| 21 | ASTM D6241 | - CBR Puncture |
| 22 | ASTM D6364 | - GS Compression |
| 23 | ASTM D6454 | - TRM Compression |
| 24 | ASTM D6475 | - Mass/Unit Area ECB |
| 25 | ASTM D6524 | - TRM Resiliency |
| 26 | ASTM D6525 | - EC Thickness |
| 27 | ASTM D6566 | - TRM Mass/Unit Area |
| 28 | ASTM D6567 | - TRM Light Penetration |
| 29 | ASTM D6637 | - Geogrid Tensile |
| 30 | ASTM D6693 | - PO Tensile |
| 31 | ASTM D6818 | - TRM Tensile |
| 32 | ASTM D7003 | - R-GM Strip Tensile |
| 33 | ASTM D7004 | - R-GM Grab Tensile |
| 34 | ASTM D7005 | - Ply Adhesion |
| 35 | ASTM D7179 | - GN Breaking Force |
| 36 | ASTM D7556 | - In-Air Cyclic Tension |
| 37 | ASTM D7737 | - GG Junction Strength |
| 38 | ASTM D7748 | - GG Flexural Rigidity |
| 39 | ASTM D7880 | - GS Bag Flow |
| 40 | ISO 811 | - Hydro Pressure |
| 41 | ISO 9864 | - Mass/Unit Area |
| 42 | ISO 10319 | - Wide Width Tensile |
| 43 | ISO 10321 | - Wide Width Tensile seams |
| 44 | ISO 12236 | - CBR Puncture |
| 45 | ISO 13426 | - GC Junction Strength |