RSA Geolab, LLC
Attn: Rasheed S. Ahmed

(908) 964-0786



 


List of Accredited Test Methods:


·         ASTM D374   - Micrometer Thickness

·         ASTM D413   - Adhesion

·         ASTM D570   - Water Absorption

·         ASTM D751   - Thickness

·         ASTM D792   - Specific Gravity

·         ASTM D882   - Strip Tensile

·         ASTM D1004 - 90° Tear

·         ASTM D1203 - Volatile Loss

·         ASTM D1204 - Dimensional Change

·         ASTM D1593 - PVC Thickness

·         ASTM D1603 - C.B. Content (Tube)

·         ASTM D1621 - Core Compression

·         ASTM D1777 - Textile Thickness

·         ASTM D3015 - C. B. Dispersion

·         ASTM D3083 - Seam Strength

·         ASTM D3776 - Mass/Unit Area

·         ASTM D4218 - C. B. Content (Muffle)

·         ASTM D4491 - Permittivity

·         ASTM D4533 - Trap Tear

·         ASTM D4545 - Factory Peel & Shear

·         ASTM D4632 - GT Grab                                           

·         ASTM D4716 - Transmissivity                      

·         ASTM D4751 - A.O.S.                                                          

·         ASTM D4833 - Index Puncture

·         ASTM D4884 - GT Sewn Seam

·         ASTM D5035 - GT Strip Tensile

·         ASTM D5199 - Thickness

·         ASTM D5261- Mass/Unit Area

·         ASTM D5321 - Direct Shear

·         ASTM D5323 - 2% Secant Modulus

·         ASTM D5596 - C.B. Disp. Microtome

·         ASTM D5887 - GCL Flux

·         ASTM D5890 - Swell Index

·         ASTM D5891 - Fluid Loss

·         ASTM D5993 - GCL Mass Per Unit Area

·         ASTM D5994 - T-GM Core Thick

·         ASTM D6241 - CBR Puncture

·         ASTM D6243 - GCL Direct Shear

·         ASTM D6392 - Thermo-Fusion Seam

·         ASTM D6496 - Peel Strength GCL’s

·         ASTM D6693 - Polyolefin Tensile

·         ASTM D6768 - GCL Tensile

·         ASTM D7003 - R-GM Strip Tensile

·         ASTM D7004 - R-GM Grab Tensile


·         ASTM D7005 - Ply Adhesion

·         ASTM D7466 - Asperity Height

·         ASTM F904    - Ply Bond Strength

·         FTM STD. No. 101C – GM Puncture (2065)