Geosynthetic Accreditation Institute
Ten
Cate Geosynthetics Asia Sdn. Bhd.
Attn: Boon
Kean Tan
603 5192 8576
List
of Accredited Test Methods:
1 | ASTM D4491 | - Permittivity |
2 | ASTM D4533 | - Trap Tear |
3 | ASTM D4595 | - GT Wide Width Tensile |
4 | ASTM D4632 | - GT Grab |
5 | ASTM D4716 | - Transmissivity |
6 | ASTM D4751 | - A.O.S. |
7 | ASTM D4833 | - Index Puncture |
8 | ASTM D4884 | - GT Sewn Seam |
9 | ASTM D5199 | - Thickness |
10 | ASTM D5261 | - GT Mass/Unit Area |
11 | ASTM D5890 | - GCL Swell |
12 | ASTM D5891 | - GCL Fluid Loss |
13 | ASTM D5993 | - GCL Mass |
14 | ASTM D6241 | - CBR Puncture |
15 | ASTM D6637 | - GG Tensile |
16 | ASTM D6496 | - Peel Strength GCL |
17 | ASTM D6768 | - GCL Tensile |
18 | ASTM D7238 | - UV Florescent |
29 | ASTM D7737 | - Junction Strength GG |
20 | ISO 09863 | - Thickness |
21 | ISO 09864 | - Mass Per Unit Area |
22 | ISO 10319 | - Wide Width Tensile |
23 | ISO 10321 | - Seam Strength |
24 | ISO 11058 | - Permeability |
25 | ISO 12236 | - CBR Puncture |
26 | ISO 12956 | - Opening Size |
27 | ISO 12958 | - Transmissivity |
28 | CEN 918 | - Dropped Cone |
29 | EN 12224 | - Xenon Arc UV |